CHAPTER 4 INSTALLATION
6) Fit the cable clamp [1] that comes with
the adapter to the plate for the printer
board.
If you are not installing a hard
disk (HD-65), carry out step 7).
7) Mount the HDD face plate [2] using a
screw [1] that comes with the adapter.
8) Mount the rear cover you removed in
step 3).
4-18
COPYRIGHT © 2002 CANON INC.
[1]
2001 2001 2001 2001
CANON Printer Board-N1/iN-E5 REV.0 JAN. 2002
[1]
F04-202-05
[2]
F04-202-06