Canon iR1600 Service Manual page 269

13) Open the fixing cover, and remove the
6 screws [15]; then, detach the fixing
unit [16].
1. For the screw inside the
circle, be sure to use a hex
wrench (less than 2 mm).
2. When removing the fixing
assembly, be sure to hold it as
shown. Be sure not to impose
force on the sensor lever [17].
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 10 INNER 2-WAY TRAY
[15]
[16]
[15]
F10-401-08
F10-401-09
[15]
[17]
10-9