Registration Roller Assembly; Removing The Registration Roller - Canon iR1600 Service Manual

20) Disconnect the connector [26] of the
registration paper sensor.
21) Remove the 4 screws [27], and detach
the drive assembly [28].

5.4 Registration Roller Assembly

5.4.1 Removing the Registration Roller

1) Remove the drive assembly (5.3.1 in
Chapter6).
2) Remove the 2 screws [1], and detach the
leaf spring [2] from the boss [3].
3) Remove the screw [4], and detach the
jam removing knob [5].
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 6 PICKUP/FEDING SYSTEM
[28]
F06-503-08
[2]
F06-504-01
[5]
F06-504-02
[27]
[27] [26]
[3]
[1]
[4]
6-31