Canon iR1600 Service Manual page 268

CHAPTER 10 INNER 2-WAY TRAY
10) Disconnect the connector [10] of the
inner 2-way tray PCB; then, free the
harness from the harness guide.
11) Remove the 2 screws [11], and remove
the fixing connector fixing plate [12]
and the grounding wire [13].
12) Disconnect the 3 connectors [14] from
the fixing connector fixing plate, and
free the harness from the harness guide.
10-8
[10]
[11]
[13]
[11]
[14]
COPYRIGHT© 2002 CANON INC.
F10-401-05
[12]
F10-401-06
[14]
F10-401-07
2000 CANON iR1600/iR2000 REV.1 JAN. 2002