11) Remove the 2 screws [20], and open
the pressure roller assembly [21]; then,
remove the D-cut shaft found on the
right side.
1. The static eliminating brush
[22] can come off. Take care
not to lose it.
2. Do not tilt the fixing roller
assembly [23]; otherwise, the
fixing roller can come off the
bushing. Be sure to place it
on a flat surface.
12) Remove the 2 screws [24] for the pres-
sure roller assembly, and detach the in-
let guide [25].
COPYRIGHT© 2002 CANON INC.
2000
CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 7 FIXING SYSTEM
[21]
2
1
[20]
F07-304-08
[23]
F07-304-09
[25]
[24]
F07-304-10
3
[22]
7-19