Canon iR1600 Service Manual page 525

5) Mount the hard disk using 2 screws [1]
that come with the disk.
6) Mount the rear cover removed in
step 3).
If you are not installing an
Ethernet Network Interface
Adapter iN-E5, carry out step
7).
7) Mount the face cover removed in
step 2).
8) Turn on the Power switch.
9) Press SYSTEM KEY to enter printer
mode.
10) Confirm that "+FORMAT DISK
-IGNORE DISK" appears on the dis-
play. Press VALUE key.
11) Confirm that "+REALLY FORMAT
-IGNORE DISK" appears on the dis-
play. Press VALUE key.
COPYRIGHT © 2002 CANON INC. 2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 JAN. 2002
CHAPTER 4 INSTALLATION
[2]
F04-105-05
[1]
4 - 9