Operation - Canon iR1600 Service Manual

Hide thumbs Also See for iR1600:

Table of Contents

CHAPTER 8 EXTERNALS AND AUXILIARY CONTROL SYSTEM

3.3 Operation

While the machine is in ESS mode, all but the LED indicator of the Energy Save key in

the control panel remain OFF. The machine will not start ESS mode for the following:

[1] absence of paper, jam, absence of toner, service error (i.e., the Error lamp is ON)

[2] presence of original in ADF (accessory)

[3] shift to ESS enabled for printer board, network board (if mounted)

The machine ends ESS mode in response to anther press on the Energy Save key in the

control panel; it will also end the mode for the following:

[1] presence of original in ADF (accessory)

[2] copyboard cover open

[3] print command from printer board (if mounted)

[4] print command or start-up command from network interface board (if mounted)

CANON iR1600/iR2000 REV.1 JAN. 2002

Show Quick Links

Table of Contents