Fixing / Registration Assembly; Duplex / Delivery Assembly - Canon imageRUNNER 2545 Series Service Manual

2
Technology > Pickup Feed System > Controls > Duplex / Delivery Assembly

■ Fixing / Registration Assembly

● Registration Control
The registration roller is driven by the main motor (M1).
In between the registration roller and the main motor is the registration clutch (CL1), servicing
to turn on and off the registration roller so that the paper will be matched in relation to the
image on the drum at correct registration.
M1
Registration roller
2 Technology > Pickup Feed System > Controls > Duplex / Delivery Assembly
CL1
F-2-90

■ Duplex / Delivery Assembly

● Duplex Feed Control
On this machine, the paper is revered outside the machine with using the reverse mouth.
Active reverse mouth is determined depending on whether or not the 2 way unit is installed.
Installing the 2 way unit makes the entire paper path longer resulting in higher productivity as
the number of sheet circulation is increased.
Following is the number of sheet circulation by size.
Without 2way unit
Paper length: longer than 230mm
Paper length: less than 230mm
With 2way unit
No.1 delivery tray
All size 3
2-64
No.1 delivery tray
1
3
T-2-40
No.2 delivery tray
3
T-2-41
2-64