Fip1.61 010-359 Restart Printer - Dell 3130cn Service Manual

FIP1.61 010-359 Restart Printer

Step
Possible causative parts:
FUSER ASSY (PL6.1.10)
PWBA MCU (PL9.1.20)
Checking the FUSER ASSY for installation
Is the FUSER ASSY installed correctly?
1 Warning: Start the operation after the FUSER ASSY
has cooled down.
Does the error still occur when the power is turned ON?
Checking the FUSER ASSY type
2
Is the FUSER ASSY installed the 3130cn FUSER?
Checking after replacing the FUSER ASSY
Replace the FUSER ASSY. (Refer to Removal 8/ Replace-
ment 36.)
3
Warning: Start the operation after the FUSER ASSY
has cooled down.
Does the error still occur when the power is turned ON?
Version 1 2008.02.15
Check
1 - 261
Chapter 1 Troubleshooting
Yes
Go to step 2.
Go to step 3.
FUSER ASSY.
Replace the
PWBA MCU.
(Refer to Removal
30/Replacement
14.)
No
End of work
Replace the
End of work