Digital Output - Dell 3130cn Service Manual

6.3 Digital Output

This function checks whether the DO components operate. A component should be selected from
the drop down listbox, and the [Start] button on the screen should be clicked. As many as ten dif-
ferent components can be simultaneously operated. However, it is recommended to operate one or
two components at a time since simultaneous operation of many different components can break
them. To stop the operation, the [Stop] button on the screen should be clicked.
Items for the Digital Output Test are as follows.
MAIN MOTOR(FULL/ HALF)
SUB MOTOR(FULL/ HALF)
PH MOTOR ON(FULL/ HALF)
DUPLEX MOTOR ON(FULL/ HALF)
OPTION FEEDER 1 MOTOR ON(FULL/
HALF)
FAN ON(HIGH/ LOW)
TONER MOTOR Y ON
TONER MOTOR M ON
TONER MOTOR C ON
TONER MOTOR K ON
REGI CLUTCH ON
MSI TURN CLUTCH ON
MSI FEED CLUTCH ON
Version 1 2007.12.28
Drop down Listbox
Item
CASSETTE1 FEED CLUTCH ON
CASSETTE2 FEED CLUTCH ON
CASSETTE2 TURN CLUTCH ON
DUPLEX CLUTCH ON
CTD SOLENOID ON
CTD SENSOR ON
OHP LED ON(Not Used)
ERASE K ON
ERASE YMC ON
EXIT CLUTCH ON
DUPLEX FAN ON
BUZZER ON
K MODE CLUTCH ON
2 - 78
Chapter 2 Operation of Diag.
Item