Dell 3130cn Service Manual page 621

Replacement 22 ARM ASSEMBLY (PL7.1.98)
10) Replace the SUPPORT LINK R by mating the two holes on the SUPPORT LINK R with the
bosses on the printer.
11) Secure the SUPPORT LINK R to the printer using the two screws (silver, tap, 10mm).
12) Mate the fitting hole on the LINK R with the right side fitting hole on the FRONT COVER.
Insert the SHAFT PIVOT and secure using the hook.
Go to the next replacement step:
Replacement 24 LEFT COVER (PL1.1.7)
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
12)-1
12)-2
3 - 144
10)
11)
11)
Zna03324KB