Dell 3130cn Service Manual page 345

Color laser printer
Hide thumbs Also See for 3130cn:
Table of Contents

Advertisement

Step
Checking the DRIVE ASSY K installation
Reseat all the DRIVE ASSY K.
8
Does the noise arise from the printer?
Checked by [Digital Output]-[DO-5(Control Panel)/SUB
MOTOR(PC)] in diagnosis.
Checking the DRIVE ASSY MAIN installation
Reseat the DRIVE ASSY MAIN.
(Refer to Removal 38/ Replacement 6)
9
Does the noise arise from the printer?
Checked by [Digital Output]-[DO-5(Control Panel)/SUB
MOTOR(PC)] in diagnosis.
Checking the DRIVE ASSY K.
Does the noise arise from the printer?
10
Checked by [Digital Output]-[DO-0 (Control Panel)/ MAIN
MOTOR (PC) ] and [Digital Output]-[DO-61 (Control
Panel)/ K MODE SNR (PC) ]in diagnosis.
Checking the DRIVE ASSY K installation
Reseat the DRIVE ASSY K.
Does the noise arise from the printer?
11
Checked by [Digital Output]-[DO-0 (Control Panel)/ MAIN
MOTOR (PC) ] and [Digital Output]-[DO-61 (Control
Panel)/ K MODE SNR (PC) ]in diagnosis.
Checking the DRIVE ASSY PH.
Does the noise arise from the printer?
12
Checked by [Digital Output]-[DO-a (Control Panel)/PH
MOTOR ON(PC)] in diagnosis.
Checking the Option Feeder Motor
Does the noise arise from the printer?
13
Checked by [Digital Output]-[DO-19(Control Panel)/
OPTION FEEDER1 MOTOR ON(PC)] in diagnosis.
Checking the DRIVE ASSY PH installation
Reseat the DRIVE ASSY PH. (Refer to Removal 17/
Replacement 27)
14
Does the noise arise from the printer?
Checked by [Digital Output]-[DO-a (Control Panel)/PH
MOTOR ON(PC)] in diagnosis.
Version 2 2008.03.27
Check
1 - 319
Chapter 1 Troubleshooting
Yes
Go to step 9.
Try replacing the
FUSER ASSY,the
Yellow, Magenta,
Cyan, Black Print
Cartridges ,
DRIVE ASSY K
and the DRIVE
ASSY MAIN one
after another.
Go to step 11.
Try replacing the
DRIVE ASSY K.
(Refer to Removal
28/ Replacement
16)
If the option tray
Go to step 14.
attached, it goes
Try replacing the
Option Feeder
ASSY. (Refer to
Removal 44/
Replacement 46)
Try replacing the
DRIVE
ASSY PH. (Refer
to Removal 17/
Replacement 27)
No
End of work.
End of work.
Go to step 12.
End of work.
End of work.
to step 13.
End of work.
End of work.

Advertisement

Table of Contents
loading

Table of Contents