Removal 21 LEVER FUSER AD (PL6.1.19)
Steps 1 through 4 are for reference. Before removing this component, check that Steps 1 through 4
have been performed.
1)
Open the FRONT COVER (PL1.2.1).
2)
Remove the FUSER. (Removal 8)
3)
Remove the REAR COVER. (Removal 10)
4)
Remove the LEFT COVER. (Removal 20)
5)
Remove the one screw (silver, with flange, tap, 10mm) that fixes the LEVER FUSER AD
(PL6.1.19) to the printer.
6)
Remove the LEVER FUSER AD from the printer.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 36
6)
5)
Zna03203KB