Dell 3130cn Service Manual page 40

Error Message
LCD
004-311
Restart Printer
Flip
Reseat Duplexer
Contact Support
006-370
Restart Printer
Flip
Contact Support
IfMessageReturns
007-340
Restart Printer
Flip
Contact Support
IfMessageReturns
007-371
Restart Printer
Flip
Contact Support
IfMessageReturns
009-360
Restart Printer
Flip
Reseat Y Cart.
Contact Support
Version 3 2008.05.30
Status Window
Printer error.
Turn off the printer. Confirm
Duplex is correctly installed.
Turn on the printer.
Contact customer support if
this failure is repeated.
004-311
Printer error.
Turn off the printer, and turn it
on again.
Contact customer support if
this failure is repeated.
006-370-01(or 02 to 0F)
*1: The error code number varies depending on the error contents.
01 to 0F: "IOT ROS Failure error"
Printer error.
Turn off the printer, and turn it
on again.
Contact customer support if
this failure is repeated.
007-340-01(or 02 to 04)
*1: The error code number varies depending on the error contents.
00: "Main Motor error"
01: "Sub Motor error"
02: Not Used
03: "PH Motor error"
04: "Option Feeder Motor error"
Printer error.
Turn off the printer, and turn it
on again.
Contact customer support if
this failure is repeated.
007-371
Printer error.
Turn off the printer. Confirm
toner is correctly installed.
Turn on the printer.
Contact customer support if
this failure is repeated.
009-360
Error Contents
<IOT Option Duplexer Failure>
The error is detected by Option Duplexer
check.
<IOT ROS Failure>
The rotational error is detected by ROS
Motor check.
Pressing three keys (< > + < > + < >)
shows detail error code.
Line1 006-370
*1
Line2 Code:01(or 02 to 0F)
<IOT Motor Failure>
Motor failure is detected.
Pressing three keys (< > + < > + < >)
shows detail error code.
Line1 007-340
Line2 Code:01(or 02 to 04)
*1
<IOT K Mode Solenoid Error>
K Mode Solenoid (Color Mode Switching
Solenoid) error is detected.
<IOT (Y) Toner CRUM Error>
Yellow Toner CRUM communication
error is detected.
1 - 14
Chapter 1 Troubleshooting
FIP to be
referred
Flows 7
FIP1.7
Flows 8
FIP1.8
*1
Flows 9:
Main Motor
Flows 10:
Sub Motor
Flows 12:
PH Motor
Flows 13:
Option
Feeder
*1
Motor
FIP1.9:
Main Motor
FIP1.10:
Sub Motor
FIP1.12:
PH Motor
FIP1.13:
Option
Feeder
Motor
Flows 14
FIP1.14
Flows 15
FIP1.15