Operation Mode Table; Fip-1.N1 When Power Is Turned On - Dell 3130cn Service Manual

5.2 Operation Mode Table

FIP-1.N1 When Power is Turned On

Step
Possible causative parts:
TRANSFER ASSY (PL4.1.1)
CARTRIDGE ASSY (PL5.1.18 (K)/PL5.1.19 (C)/PL5.1.20
(M)/PL5.1.21 (Y))
FUSER ASSY (PL6.1.10)
DRIVE ASSY MAIN (PL8.1.2)
DRIVE ASSY PH (PL8.1.7)
500 OPTION FEEDER (PL12.1.1)
Checking the Main Motor.
Does the noise arise from the printer?
1
Checked by [Digital Output]-[DO-0(Control Panel)/MAIN
MOTOR(PC)] in diagnosis.
Checking the Print Cartridges installation
Reseat all the Print Cartridges.
2 Does the noise arise from the printer?
Checked by [Digital Output]-[DO-0(Control Panel)/MAIN
MOTOR(PC)] in diagnosis.
Checking the TRANSFER ASSY installation
Reseat the TRANSFER ASSY.
3 Does the noise arise from the printer?
Checked by [Digital Output]-[DO-0(Control Panel)/MAIN
MOTOR(PC)] in diagnosis.
Checking the DRIVE ASSY MAIN installation
Reseat the DRIVE ASSY MAIN.
(Refer to Removal 38/ Replacement 6)
4
Does the noise arise from the printer?
Checked by [Digital Output]-[DO-0(Control Panel)/MAIN
MOTOR(PC)] in diagnosis.
Checking the Sub Motor.
Does the noise arise from the printer?
5
Checked by [Digital Output]-[DO-5(Control Panel)/SUB
MOTOR(PC)] in diagnosis.
Checking the FUSER ASSY installation
Reseat the FUSER ASSY.
6 Does the noise arise from the printer?
Checked by [Digital Output]-[DO-5(Control Panel)/SUB
MOTOR(PC)] in diagnosis.
Checking the Print Cartridges installation
Reseat all the Print Cartridges.
7 Does the noise arise from the printer?
Checked by [Digital Output]-[DO-5(Control Panel)/SUB
MOTOR(PC)] in diagnosis.
Version 2 2008.03.27
Check
1 - 318
Chapter 1 Troubleshooting
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Try replacing the
Yellow, Magenta,
Cyan, Black Print
Cartridges, the
TRANSFER
ASSY and the
DRIVE ASSY
MAIN one after
another.
Go to step 6. Go to step 10.
Go to step 7.
Go to step 8.
No
Go to step 5.
End of work.
End of work.
End of work.
End of work.
End of work.