Removal 43 MPF ROLLER (PL3.1.99)
1)
Remove the 250 SHEET PAPER TRAY (PL2.1.1) from the printer.
2)
Release the hook of the ROLL CORE MSI (PL3.1.9) on the right of the MPF ROLLER (PL
3.2.10), and slide the ROLL CORE MSI to the right.
3)
Release the groove on the MPF ROLLER from the vertical pin mounted on the SHAFT MSI
(PL3.1.12) by sliding the MPF ROLLER to the right.
4)
Remove the MPF ROLLER from the SHAFT MSI by rotating the MPF ROLLER 180 degrees.
Version 3 2008.05.30
Chapter 3 Removal and Replacement Procedures (RRPs)
2)-2
2)-1
3 - 84
3)
4)
Zna03056KA