Dell 3130cn Service Manual page 579

Replacement 4
14)
When performing the step described below, ensure that the harness will not be caught
between the CHUTE MSI and the printer.
13) Replace the CHUTE MSI by mating the two bosses on the CHUTE MSI with the holes on the
printer.
14) Secure the CHUTE MSI to the printer using the two screws (silver, tap, 10mm).
Go to the next replacement step:
Replacement 28 ROLL ASSY MSI (PL3.1.8)
Version 3 2008.05.30
INTEGRATED FEEDER ASSEMBLY (PL3.2.99)
Chapter 3 Removal and Replacement Procedures (RRPs)
13)
14)
3 - 102
Zna03083KB