Replacement 28 ROLL ASSY MSI (PL3.1.8)
1)
White
When performing the step described below, ensure that the color of each BEARING is
correct.
The color of the right BEARING is black.
The color of the left BEARING is white.
1)
Attach the BEARING EARTH and the BEARING to the ROLL ASSY MSI.
2)
Replace the ROLL ASSY MSI to the printer by inserting the right and left ends of the ROLL
ASSY MSI into the holes on the printer.
3)
Slide the left and right of the BEARINGs outward into the holes on the printer, and secure
using the e-rings.
Continues to the next page.
Version 1 2008.01.08
3)-2
3)-1
2)
Chapter 3 Removal and Replacement Procedures (RRPs)
1)
Black
3 - 153
3)-1
3)-2
Zna03327KA