Dell 3130cn Service Manual page 426

Item
EXIT SNR
REGI SNR
Version 3 2008.05.30
NOTE: Fuser is very hot, so pay sufficient attention at work to above
burns, etc.
1) Turn on the power and enter the CE Diag.
2) Execute the EXIT SNR.
3) Open the Front Cover.
4) Check the sensor.
5) Click the stop button to stop the test.
6) Close the Front Cover.
1) Turn on the power and enter the CE Diag.
2) Execute the REGI SNR.
3) Remove the 250 paper cassette.
4) Insert the paper into the paper path of the Regi assy.
5) Click the stop button to stop the test.
6) Replace the 250 paper cassette.
2 - 72
Chapter 2 Operation of Diag.
Confirmation procedures
Zna02103KB
Zna02104KA