Messages Displayed When Using The Printer Function; Messages Displayed On The Control Panel When Using The Printer Function - Ricoh MP 2553 Series Read Me First

Messages Displayed When Using the Printer
Function
This section describes the principal messages that appear on the display panel, error logs or reports. If
other messages appear, follow their instructions.

Messages Displayed on the Control Panel When Using the Printer Function

• Before turning off the power, see page 60 "Turning On/Off the Power".
Message
"Hardware Problem:
Ethernet"
"Hardware Problem: HDD"
"Hardware Problem: USB"
"Hardware Problem:
Wireless Card"
(A "wireless LAN board" or
"Bluetooth interface unit" is
referred to as a "wireless
card".)
"Hardware Problem:
Wireless Card"
(A "wireless LAN board" or
"Bluetooth interface unit" is
referred to as a "wireless
card".)
Causes
An error has occurred in the
Ethernet interface.
An error has occurred in the
hard disk.
An error has occurred in the
USB interface.
The wireless LAN board can
be accessed, but an error was
detected.
• The Bluetooth interface
unit was connected while
the machine was turned
on.
• The Bluetooth interface
unit was removed while
the machine was turned
on.

Messages Displayed When Using the Printer Function

Solutions
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Turn off the power, and then back on
again. If the message appears again,
contact your service representative.
Turn off the power, and then confirm
the wireless LAN board is inserted
correctly. And then, turn on the power
again. If the message appears again,
contact your service representative.
Turn off the power, and then confirm
the Bluetooth interface unit is inserted
correctly. And then, turn on the power
again. If the message appears again,
contact your service representative.
195