Ricoh MP 2553 Series Read Me First page 617

Specify the time to limit repeated access by a user.
Use the number keys to enter the time between "0" and "60", and then press [ ].
Default: [15]
• Managed User Host Limit
Specify the number of user accounts to manage under "Security Setting for Access
Violation".
Use the number keys to enter the number between "50" and "200", and then press [ ].
Default: [200]
• Password Entry Host Limit
Specify the number of passwords to manage under "Security Setting for Access
Violation".
Use the number keys to enter the number between "50" and "200", and then press [ ].
Default: [200]
• Status Monitor Interval
Specify the monitoring interval of "Managed User Host Limit" and "Password Entry Host
Limit".
Use the number keys to enter the time between "1" and "10", and then press [ ].
Default: [3]
• Off
Default: [Off]
Password Entry Violation
This can be specified by the machine administrator.
If the number of authentication requests exceeds the setting, the system classifies the access session
as a password attack. The access session is recorded in the Access Log and the log data is sent to
the machine administrator by e-mail.
If the "Max. Allowed No. of Access" is set to [0], password attacks are not detected.
• Max. Allowed No. of Access
Specify the maximum number of allowable authentication attempts.
Use the number keys to enter the number between "0" and "100", and then press [ ].
Default: [30]
• Measurement Time
Specify the interval to count the number of repeated failed authentication attempts. When the
measurement time is over, the logged counts of failed authentication attempts are cleared.
Use the number keys to enter the time between "1" and "10", and then press [ ].
Default: [5]
Specifying the Extended Security Functions
259