Ricoh MP 2553 Series Read Me First page 260

10. Troubleshooting
Message
"Transmission has failed.
Insufficient memory in the
destination hard disk. To
check the current status,
press [Scanned Files
Status]."
"Transmission has failed. To
check the current status,
press [Scanned Files
Status]."
When data cannot be sent because a currently used file is selected
Message
"Selected file is currently in
use. File name cannot be
changed."
"Selected file is currently in
use. Password cannot be
changed."
"Selected file is currently in
use. User name cannot be
changed."
214
Causes
Transmission has failed.
There was not enough free
space on the hard disk of the
SMTP server, FTP server, or
client computer at the
destination.
While a file was being sent,
a network error occurred
and the file could not be sent
correctly.
Causes
You cannot change the
name of a file whose status
is "Waiting..." or that is
being edited with
DeskTopBinder.
You cannot change the
password of a file whose
status is "Waiting..." or that is
being edited with
DeskTopBinder.
You cannot change the
sender's name whose status
is "Waiting..." or that is
being edited with
DeskTopBinder.
Solutions
Allocate sufficient space.
If the same message appears again
after scanning again, the cause could
be a mixed network, or else network
settings were changed during WSD
scanner transmission. For details about
network error, contact your
administrator.
Solutions
Cancel transmission ("Waiting..." status
cleared) or the DeskTopBinder setting,
and then change the file name.
Cancel transmission ("Waiting..." status
cleared) or the DeskTopBinder setting,
and then change the password.
Cancel transmission ("Waiting..." status
cleared) or the DeskTopBinder setting,
and then change the user name.