Ricoh MP 2553 Series Read Me First page 249

Message
"HDD is full."
"HDD is full. (Auto)"
When there is not enough memory
Message
"84: Error"
"92: Error"
When there is a problem with a parameter
Message
"86: Error"
Causes
The hard disk became full
while printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file.
The hard disk became full
while using the error job
store function to store
Normal Print jobs as Hold
Print files.
Causes
There is no work area
available for image
processing.
Printing was canceled
because [Job Reset] or the
[Stop] key was selected on
the machine's control panel.
Causes
Parameters of the control
code are invalid.
Messages Displayed When Using the Printer Function
Solutions
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold
Print, or Stored Print file.
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of
the Temporary Print file and/or the
Stored Print file.
Solutions
Decrease the number of files sent to the
machine.
Perform the print operation again if
necessary.
Solutions
Check the print settings.
203