Ricoh MP 2553 Series Read Me First page 417

7. Press [Change] for "Server Name".
Specify the name of the server for external authentication.
8. Enter the server name, and then press [OK].
Enter the IPv4 address or host name.
9. In "Authentication Type", select the authentication system for external authentication.
Select an available authentication system. For general usage, select [Default].
10. Press [Change] for "Domain Name".
11. Enter the domain name, and then press [OK].
You cannot specify a domain name under an authentication system that does not support domain
login.
12. Press [Obtain URL].
The machine obtains the URL of the server specified in "Server Name".
If "Server Name" or the setting for enabling SSL is changed after obtaining the URL, the URL is "Not
Obtained".
13. Press [Exit].
If you have not registered a group on the external authentication system being used, proceed to
step 20.
If you have registered a group, proceed to step 14.
Integration Server Authentication
59