Ricoh MP 2553 Series Read Me First page 615

For details, see "Reception Functions", Fax.
Authenticate Current Job
This can be specified by the machine administrator.
This setting lets you specify whether or not authentication is required for operations such as
canceling jobs under the copier and printer functions.
If you select [Login Privilege], authorized users and the machine administrator can operate the
machine. When this is selected, authentication is not required for users who logged in to the
machine before [Login Privilege] was selected.
If [Access Privilege] is specified, any user who performed a copy or print job can cancel the job.
Also, the machine administrator can cancel the user's copy or print job.
Even if you select [Login Privilege] and log on to the machine, you cannot cancel a copy or print
job that is being processed if you are not privileged to use the copy and printer functions.
You can specify "Authenticate Current Job" only if "User Authentication Management" was
specified.
Default: [Off]
@Remote Service
This can be specified by the machine administrator.
Communication via HTTPS for @Remote Service is disabled if you select [Prohibit].
When setting it to [Prohibit], consult with your service representative.
If it is set to [Proh. Some Services], it becomes impossible to change settings via a remote
connection, providing optimally secure operation.
Default: [Do not Prohibit]
Update Firmware
This can be specified by the machine administrator.
Specify whether to allow firmware updates on the machine. Firmware update means having a
service representative update the firmware or updating the firmware via the network.
If you select [Prohibit], firmware on the machine cannot be updated.
If you select [Do not Prohibit], there are no restrictions on firmware updates.
Default: [Do not Prohibit]
Change Firmware Structure
This can be specified by the machine administrator.
Specify whether to prevent changes in the machine's firmware structure. The Change Firmware
Structure function detects when the SD card is inserted, removed or replaced.
If you select [Prohibit], the machine stops during startup when a firmware structure change is
detected and a message requesting administrator login is displayed. After the machine
administrator logs in, the machine finishes startup with the updated firmware.
Specifying the Extended Security Functions
257