Ricoh MP 2553 Series Read Me First page 306

2. Installing the Printer Driver
7. Select [Specify a new port], and then click [Next].
8. Select [LPR Port], and then click [Next].
9. Enter the machine name or IP address in the [Name or address of server providing lpd:]
box.
10. Enter "lp" in the [Name of printer or print queue on that server:] box, and then click [OK].
11. Select the [Printer Name:] check box of the machine model you want to use.
12. Configure the user code, default printer, and shared printer as necessary.
13. Click [Continue].
The installation starts.
14. Click [Finish].
Select one of the options to restart the computer either now or later, and then click [Finish].
• The [Auto Play] dialog box is displayed only for a few seconds under Windows 8 and Windows
Server 2012. If the [AutoPlay] dialog box disappears, use the following procedure to replay the
CD-ROM:
1. On the Charm Bar, click [Search], and then click [Computer].
2. Double-click the CD-ROM drive in which the provided CD-ROM is set, and then click
"Setup.exe".
Using the WSD port
• The WSD port can be used under Windows Vista/7/8, or Windows Server 2008/2008
R2/2012.
• You can connect to the printer only if both the printer and computer are on the same network
segment, or "Network discovery" is enabled. For details, see Windows Help.
Windows Vista, Windows Server 2008
1. Quit all applications. (Do not close this manual.)
2. On the [Start] menu, click [Network].
3. Right-click the machine's icon, and then click [Install].
4. Click [Locate and install driver software (recommended)].
5. Click [Browse my computer for driver software (advanced)].
20