Recalling A User Preset - Extron electronics ISS 506 User Manual

TRANSITION
CUT
TAKE
EFFECTS
WIPE PIP
DISSOLVE TITLE
Figure 3-22 — Dissolving to the selected input
N Input selections can be made with audio broken away under RS-232/RS-422
or Ethernet control only. See chapter 4, "SIS
chapter 5, "Switcher Software"; and chapter 6, "HTML Operation".
The input button lights green when video only is selected.
The input button lights red when audio only is selected.
N Video and audio outputs can be muted under RS-232/RS-422 or Ethernet
control only. See chapter 4, "SIS
"Switcher Software" and chapter 6, "HTML Operation".
The Input button blinks, alternating between red and amber when video is
muted.
The input button blinks, alternating between green and amber when audio is
muted.
The input button blinks amber when both video and audio are muted.

Recalling a user preset

There are three user presets per input. The presets save color, tint, contrast,
brightness, detail, sizing, and centering settings. See "User Presets menu", earlier
in this chapter, to save and erase presets. Cycle through and recall these memories
by repeatedly pressing the appropriate input button. The LCD window identifies
the recalled preset (figure 3-23).
Press Button
3
User Preset #2
Recalled
Figure 3-23 — Recalling user presets
Press and release the Take button.
If the Wipe or Dissolve effect is selected (lit):
The Preview 3 button goes out and the Program 3 button lights green.
The Program 6 button goes out and the Preview 6 button lights green.
On the program monitor the switch is accompanied by either the wipe
or dissolve effect (selected using the Effects buttons). The duration of
the effect, from 0 to 5 seconds, is set using the menu controls.
PROGRAM
3
1 2 4
FREEZE
PREVIEW
3 4
1 2
FREEZE
= Lit button = Unlit button
If the PIP or Title effect is selected (lit):
The Preview 3 button and the Program 6 button remain lit.
The Take button blinks until you press Cut or Take to turn off the PIP
or title effect.
™ Programming and Control"; chapter 5,
Press Button
3
User Preset #3
Recalled
ISS 506 Integration Seamless Switcher • Operation
5 6
LOGO 1 LOGO 2
/BLACK /BLACK
6
5
LOGO 1 LOGO 2
/BLACK /BLACK
= Blinking button
TAKE
™ Programming and Control";
Press Button
3
User Preset #1 User Preset #2
Recalled Recalled
3
3-29