Installing The Software - Extron electronics ISS 506 User Manual

Switcher Software
ISS 506 Control Program
The Windows-based Extron ISS 506 Control Program, which communicates with
the switcher via the RS-232/RS-422 port, the Configuration port, and the LAN port,
provides an easy way to configure and operate the ISS 506 Integration Seamless
Switcher. The program is compatible with Windows 2000 and Windows XP.

Installing the software

The program is contained on the Extron Software Products CD-ROM, disk B.
Install the software as follows:
N For full functionality, download and install all of the following programs:
1.
Figure 5-1 — Software CD window
2.
3.
Figure 5-2 — Software installation
5-2 ISS 506 Integration Seamless Switcher • Switcher Software
• The ISS 506 Control Program
• The Firmware Loader
• The IP Link File Manager
Insert the CD-ROM into the drive. The installation program should start
automatically. If it does not self-start, run Launch.exe from the CD.
The Extron software CD window appears (figure 5-1).
Click the Software tab (figure 5-1).
Scroll to the desired program and click Install (figure 5-2).