Menu System Overview - Extron electronics ISS 506 User Manual

Operation, cont'd
h
i
j
k
N The Preview Output and the Fixed Program audio output connectors are not

Menu system overview

Figure 3-2 shows a flowchart of the main menus in the menu system.
N On figure 3-2 and all other flowcharts in this chapter, solid lines indicate screen
Menu button — Press the Menu button to activate the menu system and to scroll
Next button — Press the Next button to move between the submenus of a selected
Adjust [ and Adjust { knobs — When a submenu is active, rotate the Adjust [
N If you press the Menu button while a main menu is active, the next main menu
N To return to the default screens, let the switcher remain idle for 30 seconds until
N From any menu or submenu, after 30 seconds of inactivity, the ISS saves all
3-4 ISS 506 Integration Seamless Switcher • Operation
Status display — The 16-column by 2-line LCD displays configuration menus
and status information. See "Menu system overview", below, and "Front
Panel Operations", later in this chapter, for details.
Menu button — The Menu button enters and moves through the main menu
system in the ISS. See "Menu system overview", below, and "Front Panel
Operations", later in this chapter, for details.
Next button — The Next button steps through the submenus in the ISS menu
system. See "Menu system overview", below, and "Front Panel Operations",
later in this chapter, for details.
Adjust [ (horizontal) and Adjust { (vertical) knobs — The Adjust [ and
Adjust { knobs change settings when used in conjunction with the picture
adjustment buttons or the menu system. Rotate these knobs to change picture
settings when one of the picture adjustment buttons is selected. In the menu
system, rotate these knobs to scroll through the selection options and make
adjustments.
Volume knob — The Volume knob changes the attenuation of the audio
output on the Program Variable audio output.
affected by the front panel Volume control.
changes initiated by the operator. Dashed lines indicate screen changes that are
the result of a timeout function.
through the nine or ten main menus.
main menu, to activate a submenu for viewing or configuration, and to save
a selection. Pressing the Next button during input configuration causes the
current input's number and format type to be displayed on the LCD window.
knob and Adjust { knob to scroll through the submenu options and select
a setting. Refer to the flowcharts in this chapter and to specific sections for
explanations of the knob adjustments.
becomes active.
If you press the Menu button while a submenu is active, the LCD window backs
up to display that submenu's main menu.
the selected screen times out; or press the Menu button until the Exit Menu
appears, then press the Next button.
adjustment settings and times out to the default LCD display cycle.