Extron electronics ISS 506 User Manual page 131

Figure 5-24 — IP Link File Manager program window
5. Check to see that the ISS contents include the directory "nortxe-graphics".
If the "nortxe-graphics" directory is present in the ISS, proceed to step 6.
If the "nortxe-graphics" directory is not present in the ISS, create the folder
as follows:
a. Right-click the ISS's IP address in the IP Link Interfaces (right) section of
the window.
b. Click Add Directory.
c. Type the name nortxe-graphics and then press the PC's Enter key
6. Upload images to the ISS as follows:
N The only valid file format for uploaded image files is *.bmp.
Valid file names are up to 240 alphanumeric characters with no spaces.
B
itmap (*.bmp) images must be formatted as 24-bit RGB.
a. In the Computer System (left) section of the IP Link File Manager
window, navigate to the folder that contains the file(s) that you want to
upload to the ISS.
b. Select the file(s) that you want to upload.
c. Drag the file(s) to the "nortxe-graphics" directory in the IP Link Interfaces
(right) section.
The file upload queue at the bottom of the IP Link File Manager program
window shows the files that you have dragged to the ISS and the status
of the upload.
After a few seconds, the name(s) of the dragged file(s) appears in the
interface file list.
ISS 506 Integration Seamless Switcher • Switcher Software 5-23