Example 8: Recalling A Preset - Extron electronics VGA MATRIX SWITCHERS MVX PLUS 128 User Manual

Press and release the Enter button (fi gure 3-43). The current confi guration is
4.
now stored in the selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW
ENTER PRESET
The Enter and Preset
buttons return to unlit or
background illumination.
Figure 3-43 — Press the Enter button

Example 8: Recalling a preset

In the following example, a preset is recalled to become the current confi guration.
The steps show the front panel indications that result from your action.
1. Press and release the Esc button (fi gure 3-44).
Press the Esc button to clear all selections.
C O N T R O L
VIEW
ENTER PRESET
The button flashes once.
Figure 3-44 — Clear all selections
2. Press and release the Preset button (fi gure 3-45).
Press and release the Preset button.
PRESET
The Preset button lights.
Figure 3-45 — Enter Recall Preset mode
3. Press and release the input or output button for the desired preset
(fi gure 3-46).
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not recalled.
1 2 3 4 5 6 7 8 9
= Blinking button
Figure 3-46 — Select the preset
ESC
All input buttons and output
buttons return to unlit or
background illumination.
ESC
(Preset Assigned)
1 2 3
All input buttons with
assigned presets light red.
Unlit
(No Preset Assigned)
INPUTS
MVX Plus 128 VGA Matrix Switchers • Operation
Red
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter button blinks
to indicate the need to
recall the preset.
3-25