Extron electronics ISS 506 User Manual page 61

5. Press the Next button. The Logo Type submenu appears.
6. Rotate the Adjust
unwanted portions of the bitmap.
Level — The PIP keys out all material whose luminance level is below a
variable threshold.
RGB — The PIP keys out all material of a specific color (red, green, and/or
blue) that is below a variable threshold.
7. Press the Next button. The Key submenu appears (figure 3-27).
30 sec.
From Logo #1 Pre Type
< >
Figure 3-26 Level RGB
Figure 3-27 — Configuring a logo, continued
8. If you selected RGB in step 6, rotate the Adjust
video plane to key.
9. Watch the connected program or preview display while you slowly rotate the
{
Adjust knob to remove the unwanted material from the logo. As soon as the
unwanted material is removed from the screen, stop turning the knob.
10. Allow the 30-second time delay to expire. The ISS returns to the default
display.
{
knob to select (< >) how you will remove (key out)
Level
Press
NEXT
Step
7
30 sec.
RGB
Logo #1 Pre RGB
< >
R 000 G000 B000
Rotate the Ajust knob
Step
to select the Red,
8
Green, or Blue video
plane to key out.
ISS 506 Integration Seamless Switcher • Operation
30 sec.
Logo #1 Pre Lev
000
Step
000
9
through
255
30 sec.
Logo #1 Pre RGB
< >
R 000 G000 B000
000
through
255
Watch the display
Step
while you rotate the
9
Ajust knob to key out
the luminance level
or specific color.
[
knob to select (< > ) the
Default
Cycle
Step
10
3-33