Extron electronics ISS 506 User Manual page 59

6. Press the Next button (figure 3-25). The Capture Size submenu appears.
Press
NEXT
Capture Size
From
Step
Figure 3-24 X=1024
6
0000
through
nnnn*
Rotate the knobs to
Step
move the lower-right
7
corner of the image
area to be captured.
X-Axis
Figure 3-25 — Capturing a logo, continued
7. Use the Adjust knobs to shift the end point (lower-right corner) of the capture
area.
N Rotate the Adjust
Rotate the Adjust
8. Press the Next button. The Save Capture to File submenu appears.
9. Rotate either Adjust knob to select one of the available file names (01.bmp
through 16.bmp) or N/A (to abandon the logo).
10. Press the Next button. The LCD window displays a counter that shows the
progress of the save operation until it reaches 100 percent.
N Saving a bitmap image can take a couple of minutes. The ISS is unresponsive to
front panel operations and SIS commands while it saves the file.
11. Press the Next button and Menu buttons as necessary to return to the default
display cycle.
Default
Cycle
Press
30 sec.
30 sec.
NEXT
Save Cap to File
Step 9.BMP
Y=0768
8
0000
N/A or
through
1.BMP to
nnnn*
16.BMP
Step
9
Y-Axis
* nnnn = the selected output resolution.
[
knob to shift the end point on the X axis (horizontally).
{
knob to shift the end point on the Y axis (vertically).
ISS 506 Integration Seamless Switcher • Operation
Press
30 sec.
NEXT MENU
Saving 9.BMP
Step yy% Done Step
10 11
N The front panel is
disabled until the
% Done report
reaches 100%.
NEXT
3-31