Capturing A Logo - Extron electronics ISS 506 User Manual

"Operation".
Logo Setup Area
Figure 5-8 — Logo Setup/Capture window

Capturing a logo

Capture a logo as follows:
N For best results, freeze the input with the image that you want to capture.
1. Click the appropriate Image Source Radio button in the Logo Capture area to
select the source (preview output or program output) that has the image that
you want to capture.
2. If necessary, click (select) the Yellow Border checkbox to display yellow crop
marks on the display with the desired image:
3. Watch the display with the desired image. On the logo capture area:
a. Click and drag the center of the selection window to center the window
over the image.
Click and drag the anchor points ( ) of the selection window to crop the
b.
image you want to save as a logo.
Click in the Enter logo name field, type in a name for you logo, and click
4.
the Start Capture button. The program displays a window that shows the
progress of the capture (figure 5-9). Depending on the size of the logo, this
ISS 506 Integration Seamless Switcher • Switcher Software
Logo Capture Area
5-9