Picture Adjustments - Extron electronics ISS 506 User Manual

Picture adjustments

X@ X2$
Col ]
A front panel color adjustment has occurred.
switched to the adjusted input and
X@ X2$
Tin ]
A front panel tint adjustment has occurred.
switched to the adjusted input and
X@ X2$
Brt ]
A front panel color brightness adjustment has occurred.
or preview) switched to the adjusted input and
X@ X2$
Con ]
A front panel contrast adjustment has occurred.
preview) switched to the adjusted input and
X@ X1@
Hsz ]
A front panel horizontal size adjustment has occurred.
or preview) and
X@ X1@
Vsz ]
A front panel vertical size adjustment has occurred.
X1@
preview) and
X@ X1#
Hph ]
A front panel horizontal centering adjustment has occurred.
(program or preview) and
X@ X1#
Vph ]
A front panel vertical centering adjustment has occurred.
(program or preview) and
X@ X!*X1^
Phs ]
A front panel pixel phase adjustment has occurred.
X!
preview). is the input.
X@ X2$
Det ]
A front panel horizontal detail filter adjustment has occurred on the input switched
X@ X2$
to output .
X4@
7Dvz ]
A front panel flicker (vertical) filter adjustment has occurred for the optional scan
converter output board.
X4@
7Dhz ]
A front panel horizontal filter adjustment has occurred for the optional scan
converter output board.
X4#
7Enc ]
A front panel encoder filter adjustment has occurred for the optional scan converter
X4#
output board.
X1)
Blu ]
The blue-only mode has been turned on or off from the front panel for one or both
X1)
outputs. is the on/off status for the two outputs.
ISS 506 Integration Seamless Switcher • SIS
X2$
is the color variable.
X2$
is the tint variable.
X1@
is the size variable.
is the size variable.
X1#
is the centering variable.
X1#
is the centering variable.
X1^
is the pixel phase variable.
is the filter variable.
X4@
is the filter variable.
X4@
is the filter variable.
is the filter variable.
X@
is the output (program or preview)
X@
is the output (program or preview)
X@
is the output (program
X2$
is the brightness variable.
X@
is the output (program or
X2$
is the contrast variable.
X@
is the output (program
X@
is the output (program or
X@
is the output
X@
is the output
X@
is the output (program or
Programming and Control
™
4-9