Extron electronics ISS 506 User Manual page 158

Modifications, cont'd
3.
4.
4
Figure 7-3 — Input board installation
5.
6.
6
Figure 7-4 — Secure the input board to the standoffs
7-4 ISS 506 Integration Seamless Switcher • Modifications
From the inside of the switcher, pop the cover out of the rear panel connector
port ( c ).
See figure 7-3. Tip the input board up and guide its output connector through
the rear panel connector port (
See figure 7-3. Align the connectors on the main board and input board (
Gently apply pressure to carefully mate the board with the main board.
See figure 7-4. Secure the input board to the standoffs on the main board with
the three included screws (
d ).
5
f ).
5
5
e ).
6
6