Picture Adjustment And Menu System Controls - Extron electronics ISS 506 User Manual

e
Take button — Pressing the Take button causes the ISS to switch the input
that was selected as the preview output to the program output, using the
effect that was selected by the lit Effect button (
The Take button blinks for the duration of the switching effect. For the PIP
and Title effect, Take blinks as long as the PIP window or title is displayed on
top of the program output
N Take blinks when the PIP window or title is displayed on the program output
even if the effect was commanded using the Cut button.
f
Effects buttons — Press one of these Effects buttons - Wipe, Dissolve, PIP,
or Title, to select that effect to use when you press the Take button (
"Effects configuration menu", later in this chapter, for more details.

Picture adjustment and menu system controls

g
Picture Adjustment buttons — The picture adjustment buttons select
individual image adjustments for the preview output or program output.
Pushing a button toggles between the preview and program outputs. The
selected picture adjustment is made using the Adjust [ and Adjust { knobs
( j ).
N If the PIP mode is selected, the preview output is shown and adjusted in the
picture-in-picture window and the program output is shown and adjusted in the
main (full-size) window.
N For more information on these buttons and adjustments, see "Adjusting the
picture", later in this chapter..
Size control button — The Size button selects the display size adjustment.
The adjustment range depends on the output resolution that was selected.
Brightness/Contrast control button — The Brightness/Contrast button selects
the display brightness and contrast adjustments. The adjustment range for
both brightness and contrast is from 0 to 127.
Filter control (Detail) button — The Detail button selects the display image
detail (sharpness) adjustment. The sharpness adjustment compensates for
long cable runs. The adjustment range for the filter is from 0 to 127.
Position control button — The Position button selects the display centering
adjustment. The adjustment range depends on the output resolution that was
selected.
Color/Tint control button — The Color/Tint button selects the display color
and tint adjustments. The adjustment range for both color and tint is from 0
to 127.
N Color adjustments are available only for component video, S-video, and
composite video inputs.
Tint adjustments are available only for S-video and composite NTSC video
inputs.
Zoom button — The Zoom button selects the zoom adjustments (allowing
you to make the image or the window larger).
ISS 506 Integration Seamless Switcher • Operation
f
).
e
). See
3-3