Picture Adjustment And Menu System Controls - Extron electronics ISS 608 User Manual

EFFECTS buttons (see
C
buttons to select the effect to use to transition between the Preview output to the
Program output (see
• DISSOLVE — Press to seamlessly cross fade the video from the preview output
into the program output in user defined fade duration.
CUT button — Press to seamlessly switch the input selected as the preview
•
output to the program output, with no switching effects added.
• WIPE — Press to unroll the image in the preview output over the top of the
program output using the user-defined duration and wipe effect.
• VIDEO KEY — Press to key video from the preview input over the program video
input using an RGB key, a luminosity level key, or a transparency effect.
• PIP button — Press to display the selected Preview input as a picture in picture
window on the Program output.
LOGO button — Press to recall one of the stored logo presets on top of the
•
Preview input.
PRESETS and TAKE buttons —
D
PRESETS button — Press to recall and save layout presets.
•
• TAKE button — Press to invoke the effect selected, as indicated by the lit EFFECTS
button (

Picture Adjustment and Menu System Controls

ADJUST buttons —
E
SIZE button — Press to adjust the image or PIP window size.
•
• POSITION button — Press to adjust the image or PIP window position.
Menu navigation controls —
G
MENU button — Press to enter and move through the main menu system in the
•
ISS (see
Operations
• NEXT button — Press to move through the submenus in the ISS menu system
(see
ADJUST [ (horizontal) and ADJUST { (vertical) knobs — Rotate to change
•
settings when used in conjunction with the menu system or the ADJUST buttons
(
E
NOTE:
Status LCD display — Displays configuration menus, submenus, and status
H
information (see
figure 8 on page 11) — Press one of these EFFECTS
Effect Configuration Menu
), using the video on the preview bus.
C
Front Panel Menu Operation
on page 29).
Front Panel Menu Operation
).
• If the PIP mode is selected, the preview output is shown and adjusted
in the picture-in-picture window and the program output is shown and
adjusted in the main (full-size) window.
• For more information on these buttons and adjustments, see
the Size and Position of the Program or Preview
Front Panel Menu Operation
on page 20).
on page 13 and Front Panel Button
and Front Panel Button Operations).
on page 32).
Front Panel Button
and
ISS 608 Seamless Switcher • Operation
Adjusting
Operations).
12