Menus, Configuration, And Adjustments; Moving Through Menus By Using Front Panel Controls; Menu Overview - Extron electronics MLS 306 User Manual

Extron medialink switchers user's manual
Hide thumbs Also See for MLS 306:
Table of Contents

Advertisement

Operation, cont'd

Menus, Configuration, and Adjustments

Switcher configuration and adjustments can be performed by using the Windows-
based control program (see chapter 4 for details) or by using the front panel
controls and the menus that are displayed on the LCD screen. These menus are
used primarily when the switcher is first set up.

Moving through menus by using front panel controls

Menu button — Press the Menu button to activate menus and to move to the four
Next button — Press the Next button to move between the submenus of a selected
Volume/Adjust knob — In configuration mode rotate this knob to scroll through
Input selection buttons — When a menu or submenu is active, press an input

Menu overview

The default menus appear on the LCD when no adjustments are actively being
made. They cycle between the screen showing the name of the switcher and the
screen that shows the active input's number, as shown below.
Power
on
The main menus are as shown at right. Use
the Menu button to scroll between them.
3-4
MediaLink Switchers • Operation
main menus.
main menu. Pressing the Next button during video configuration causes the
current input's number and video format type to be displayed on the LCD.
submenu options and to make selections and adjustments. Settings and
adjustments are stored in nonvolatile memory.
selection button to select that input for configuration.
FIRMWARE
EXTRON
Ver 1.XX
MLS 506
Default menus immediately after power-on or
when audio & video are switched together
From any menu or submenu,
after seven seconds of
inactivity the MLS will save all
adjustment settings and time-
out to the default menus.
To return to the default screens,
let the MLS time-out for 7
seconds, or press the Menu button
until Exit Menu appears, then
press the Next button.
2 sec.
INPUT
EXTRON
#6
MLS 506
2 sec.
Default menus during breakaway
(via RS-232) when audio
was most recently switched
EXTRON
MLS 506
Default menus during breakaway
(via RS-232) when video
was most recently switched
FIRMWARE
Power
on
Ver 1.XX
EXTRON
MLS 506
or timeout
2 sec.
AUDIO
INPUT #2
2 sec.
2 sec.
VIDEO
INPUT #5
2 sec.
2 sec.
INPUT
#6
2 sec.
MENU
VIDEO
CONFIG
MENU
AUDIO
ADJUST
MENU
AUDIO
SETTINGS
MENU
EXIT
NEXT
MENU
MENU

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mls 506Mls 506maMls 506sa

Table of Contents