Table of Contents
Advertisement
Cut button — Pressing the Cut button causes the ISS to immediately switch
4
the input selected as the preview output to the program output, with no
switching effects added. If black screen and/or mute audio is selected for the
program output, it is deselected when a cut is selected.
Dissolve button — Pressing the Dissolve button causes the ISS to switch the
input selected as the preview output to the program output using the dissolve
effect. If black screen and/or mute audio is selected for the program output,
it is deselected when a dissolve is selected.
Input label panel — This translucent panel can be removed and replaced to
5
insert a label behind the panel. To remove the panel, insert the Philips-head
end of an Extron Tweeker or small Philips-head screwdriver into the hole in
one end of the panel, and gently slide the tab on the edge of the panel out of
the recess in the switcher housing.
Input labels can be created easily with Extron's button label generator
software, which is shipped with every Extron ISS, or with any Brother
P-Touch
™
labeler. Each input can be labeled with names, alphanumeric
characters, or even color bitmaps for easy and intuitive input and output
selection (figure 3-3). See chapter 5, "Switcher Software", for details on using
the label software.
1
2
1
2
Figure 3-3 — Sample label
Picture adjustment and menu system controls
Picture Adjustment buttons and LEDs — The picture adjustment buttons
6
select individual image adjustments that are adjusted using the Adjust
Adjust knobs (
pressed. See "Picture adjustments" later in this chapter.
Color/Tint control button — The Color/Tint button selects the display color
and tint adjustments. The color adjustment range is from 0 to 127. The tint
adjustment range is from 0 to 255.
The Color/Tint control affects only composite video and S-video inputs.
Brightness/Contrast control button — The Brightness/Contrast button
selects the display brightness and contrast adjustments. The adjustment
range for both brightness and contrast is from 0 to 63. See "Picture
adjustments" later in this chapter.
Size control button — The Size button selects the display size adjustment.
The adjustment range depends on the output resolution selected. See "Picture
adjustments" later in this chapter.
INPUTS
Rack DVD
(DVS 100)
3
4
3
4
). The LEDs above these buttons light when the button is
9
ISS 408 Integration Seamless Switcher • Operation
5
6
7
5
6
7
®
8
8
and
3-3
Advertisement
Table of Contents
