Table of Contents
Advertisement
Setup of Media
DRYER
For the individual setting method of this setting item and the description, refer to
perature Setting for the Media Heating System"
2
To cancel the setting
Procedure
3.
Adjusting the Head Height
HEAD HGT LOW
[CHANGE] NEXT
HEAD HEIGHT
LOW
52
Use
50
50
50
Recommended temperature: 50 °C
Press
Press
during the setting.
QUIT SETTING?
YES
[NO]
MENU
MEDIA SETTING
Press
Press
When the left figure is displayed, open the front cover.
LOW
High
Height-adjustment lever
Move firmly, until it stops.
to set the temperature.
to enable the setting.
Press
to select [YES].
Press
.
The screen returns to the screen shown at the left.
By selecting [NO], the screen returns to the screen dis-
played when you pressed
to select [CHANGE].
to enable the setting.
Move the height-adjustment lever to adjust
the head height.
Low
When moving to the [High] direction, the buzzer
sounds twice, and to the [Low] direction, the buzzer
sounds once.
Normally set to [Low]. For the media that is
wrinkled and comes loose from the platen, set
to [High].
P. 106, "Making the Tem-
.
Advertisement
Table of Contents
