Output Operation Management; Printing A System Report; Determining What Happens When Ink Runs Out - Roland XR-640 User Manual

Output Operation Management

Printing a System Report

This prints system information, including a list of setting values.
Procedure

Press

MENU
SUB MENU

SUB MENU
SYSTEM REPORT

Press

Determining What Happens When Ink Runs Out

This lets you change, according to your purpose, the operation that takes place when an ink cartridge is empty.
Procedure

Press

MENU
5
SUB MENU

SUB MENU
INK CONTROL

EMPTY MODE
STOP

Press
Description
When "STOP" is selected, printing pauses and so colors may be uneven. Ensure a sufficient amount of remain-
ing ink before you begin printing.
When "CONT" is selected, printing does not stop even if ink runs out completely. To replace the cartridge, wait
until printing ends or press
146
.
Press
the left.
Press
Press
the left.
Press
Start printing.
in this order to go back to the original screen.
.
Press
the left.
Press
Press
Press
Press
CONT.
"STOP": Printing pauses immediately when a cartridge becomes empty.
"CONT" (continue): Printing does not stop when a cartridge becomes empty.
When a cartridge becomes empty, a warning beep sounds.
Press
in this order to go back to the original screen.
to pause printing.
several times to display the screen shown on
.
several times to display the screen shown on
.
several times to display the screen shown on
.
twice.
twice.
to select.
to enable the setting.