Replacing The Blade - Roland XR-640 User Manual

Replacing the Blade

If the blade becomes dull, or if the edge of the blade is chipped, or if the blade quality is lowered, replace it
with a new blade.
CAUTION
CAUTION
1.
Enter the blade replacement menu.

Press .

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
REPLACE KNIFE

NOW PROCESSING. .
OPEN FRONT
COVER

Open the front cover.
FINISHED?
2.
Replace the blade.

Be sure to perform operations as specified by these instructions, and
never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Never touch the tip of the blade with your fingers.
Doing so may result in injury.
Press
on the left.
Press
Press
Press
on the left.
Press
The cutting carriage moves to a location permitting blade replace-
ment, and then the screen shown in the figure appears.
Preparations are complete when this screen appears.
Loosen the screw.
Replacing Consumable Parts
several times to display the screen shown
, and then .
.
several times to display the screen shown
.
Remove the blade holder.
3
95