Adjusting Head Height To Match Media Thickness - Roland VersaUV LEJ-640 F User Manual

Procedure
Press
MENU
HEAD HEIGHT
HEAD HEIGHT
MIDDLE
Description
When using media that is likely to rise up, note that the media may contact the print heads. When you are
using such media, adjust the head height to "HIGH."
When the head height is set to "HIGH", printing may be coarse and print quality may be a ected. If this hap-
pens, refer to the pages indicated below.
4
P. 76, "Correcting for Misalignment in Bidirectional Printing," p. 77, "Correcting for Misalignment in Bidirectional Print-
ing More Precisely ," p.82, "Preventing Soiling of the Media and Dot Drop-out"
Select "LOW" when you want to print small text at high resolution.
[HEAD HEIGHT]: MIDDLE
78
.
Press
Press
Press
HIGH
HIGH: Use this setting when using media that may rise up.
MIDDLE: Use this setting normally (recommended).
LOW: Use this setting when you want to print small text at high
resolution.
* When "HIGH" or "LOW" is selected, print quality may be a ected.
See "Description" for more information.
Press
.
to select an item.
to enable the setting.