Manual Cleaning Of Print Heads - Roland XR-640 User Manual

Manual Cleaning of Print Heads

Important Notes on This Procedure
 Before attempting this operation, remove any media.
 To prevent the heads from drying out, finish this procedure in 30 minutes or less. A warning beep sounds
after 30 minutes.
 Never use any implement other than the included cleaning stick. Cotton swabs or other lintproducing
items may damage the heads. If you use up the cleaning stick, purchase a new one from your authorized
Roland DG Corp. dealer.
 Use one cleaning stick per cleaning session, then discard the stick after use. Reusing cleaning sticks may
reduce printing quality.
 Do not put the cleaning stick used for cleaning into the cleaning liquid. It will deteriorate the liquid.
 Never rub the nozzle surface of the print heads.
 Stroke the sponges very gently, applying as little pressure as possible. Never rub, scrape, or crush them.
When a warning beep sounds during cleaning
A warning beep sounds in 30 minutes after the operation is started. At this time, stop work, and follow the
3.
procedure in step on page 86 to attach cover L and cover R, then close the front cover. Press
quit the manual-cleaning menu. After that, restart the procedure from the beginning.
CAUTION
1.
Change to the print-head manual-cleaning menu.

Remove any media

Press .

MENU
SUB MENU

SUB MENU
MAINTENANCE

MAINTENANCE
CLEANING
Maintenance that Should Be Performed More Than Once a Month
Be sure to perform operations as specified by the instructions above,
and never touch any area not specified in the instructions.
Sudden movement of the machine may cause injury.
Press
the left appears.
Press
Press
Press
The print-head carriage moves to the left side of the machine.
several times until the screen shown on
, and then .
.
.
3
to
83