Getting Ready to Receive Data from a Computer
When P. 39, "Loading Media" and P. 51, "Setup of Media" are completed, get ready to receive the data
from a computer.
CAUTION
Procedure
Close the front cover.
Make sure
If
is not lit, pull the loading lever and press
Wait until
Make sure the top menu is displayed.
If the top menu is not displayed, press
Output Is Not Possible in These Situations
The machine does not run when the front cover is open.
Never open it when printing is in progress.Doing so interrupts printing.
Data from the computer is not accepted when
Printing does not start until
set to "OFF," printing is possible even if
Data from the computer is not accepted when you are not at the top menu.
Never touch the print heads while output is in progress.
The print heads move at high speed. Hitting may cause injury.
stays steadily lit.
stays steadily lit.
lights up. (If all of the pre-heater, print-heater, and dryer are
.
, then press
Top menu
Steadily lighted
Flashing
Steadily lighted
is dark.
is not lit.)
Outputting
.
67
2