Switch Off - Roland XR-640 User Manual

Switch Off

Switch Off

WARNING
Procedure


Leave the main power switched on at all times.
Never switch off the main power. By switching on the main power, the automatic maintenance function
is carried out periodically. If the automatic maintenance is not carried out, it may result in breakdown
of this machine such as breakdown of the print heads.
Never switch off the main power or unplug the power cord suddenly while operation
is in progress.
Switching off the main power or unplugging the power cord suddenly while operation in progress
may damage the print heads. Be sure to first switch off the sub power.
If the main power is accidentally switched off, immediately turn the power back on.
When output is not being performed, remove any loaded media or switch
off the sub power.
The continued application of heat at a single location may cause the release
of toxic gases from the media or pose a fire hazard.
Hold down the sub power button for one
second or longer.
The sub power is turned off. Perform this process
after output is finished.
Press back the loading lever.
Press back the loading lever when the machine is not
used even if the power is not turned off.
2
71