Performing Distance Correction During Cutting - Roland XR-640 User Manual

Fully Utilizing Cutting Function

Performing Distance Correction During Cutting

*When you're performing printing followed by cutting, be sure to set the correction value to "0.00%. " Otherwise
the printing and cutting positions may become misaligned
Procedure

Hold down

CUTTING MENU
CALIBRATION

CALIBRATION
FEED SETTING
FEED SETTING
-0.10%

CALIBRATION
4
SCAN SETTING
SCAN SETTING
-0.10%

Press
Description
The movement distance of the media changes subtly depending on the media's thickness. This means that
the length of a line when cut may differ from the length setting in the data. You enter a correction value when
you want to align the lengths.
Default Setting
[FEED SETTING]: 0.00%
[SCAN SETTING]: 0.00%
124
and press
Press
left.
Press
Press
Press
-0.10%
Set the correction value of media feed direction.
Press
Press
Press
Press
-0.10%
Set the correction value of head movement direction.
Press
in this order to go back to the original screen.
.
twice to display the screen shown on the
.
.
to select a correction value.
to enable the setting.
, and then
.
to select a correction value.
to enable the setting.
.