Table of Contents
Advertisement
Switch On!
Switch On!
WARNING
2
Procedure
Main power switch
The Power-saving Feature (Sleep Mode)
This machine is provided with a power-saving feature that switches to a low-power "sleep mode" when a
fixed interval passes with no operation. The factory default for the time after which the machine switches to
the sleep mode is 30 minutes. When the machine is in the sleep mode, the sub power switch flashes slowly.
Using the operation panel or performing operations such as sending output data from the computer (when
media is loaded) restores the machine to its normal mode.
This setting of sleep mode can be changed. However, we recommend setting the activation time for the sleep
mode to 30 minutes or less to reduce power consumption and prevent problems such as overheating.
P. 150, "Setting the Interval until Activation of the Sleep Mode (Power Saving Function)"
38
When output is not being performed, remove any loaded media or switch
off the sub power.
The continued application of heat at a single location may cause the release
of toxic gases from the media or pose a fire hazard.
Front cover
Sub power switch
Close the front cover.
Turn on the main power switch.
Press the sub power button.
Note: For installation of the ink cartridge and
selection of the language displayed on the
display screen, refer to Setup Guide.
Advertisement
Table of Contents
