Operation Panel - Roland XR-640 User Manual

Part Names and Functions

Operation Panel

1
Display screen
This displays various setting
menus and other information.
TEST PRINT key
Holding this down for
one second or longer
performs a printing
test.
CLEANING key
You use this to per-
form cleaning of the
print heads.
TEST CUT key
TEST CUT key Hold-
ing this down for one
second or longer per-
forms a cutting test.
CUT CONFIG key
This displays the menu
for setting the condi-
tions for cutting.
MENU key
You press this to enter the
menus for various settings.
Cursor keys
You use these to select settings for
menu items, to move the media,
and for other such operations.
Panel Notation
In this document, the keys on the operation panel are indicated by the following illustration.
MENU key
SETUP key
ENTER key
PAUSE key
CLEANING key
TEST PRINT key
TEST CUT key
BASE POINT key
CUT CONFIG key
HEATER CONFIG key
SHEET CUT key
10
BUSY light
This lights up during printing, cut-
ting and other such operations.
ENTER key
You use this for such
tasks as enabling set-
ting values.
HEATER CONFIG key
You press this to make the tem-
perature setting for the media
heating system. This flashes during
warmup, then remains steadily
lighted when the preset tempera-
ture is reached.
Cursor keys
BASE POINT key
You use this when you
want to set the out-
putstart location. This
lights up when the set-
ting has been made.
SETUP key
You press this when
you load media. This
lights up when media
is loaded and the
machine is ready to
perform output.
PAUSE key
This pauses printing
operation. This lights
up when operation is
paused.
SHEET CUT key
Holding this down for
one second or longer
cuts off media.
Sub power switch
This switches the printer
on and off. (To switch
the printer off, you hold
down the switch for one
second or longer). The
light flashes slowly when
the machine is in the
sleep mode.